Scale Models

"STEELRAIN is a 2.5-generation variable HEXA GEAR with a rotary-wing aircraft configuration.

Driven by the immense value of HEXA G-R.A.M and the crystalline reactors that triggered prolonged corporate warfare, humanity continued producing HEXA G-R.A.M in pursuit of profit-willfully ignoring the warnings of environmental control AI. As the resulting contamination of the soil worsened, the world's largest military-industrial complex, MSG, recognized the urgent need to end the conflict. As such, they began developing a new HEXA GEAR based on a new concept that would be intended to shift the tide of war. The completed unit came in two similar looking but vastly different variants. The early type was a rotary-wing aircraft-style HEXA GEAR with its power source replaced by a HEXA G-R.A.M-functionally similar to first-generation models. The later type featured a system that enabled transformation into a humanoid form.
While the early type lacked any particularly unique features aside from being an increasingly rare aircraft-type, it earned high marks for reliability and ground attack capability thanks to its standard loadout of dual 20mm Gatling guns and a broad array of ballistic weapons. This, combined with the inherent advantage of aerial strikes, gave it a decisive edge over most second-generation HEXA GEAR units, which were primarily vehicle or biped-based.

The later type further expanded its versatility. It incorporated a BMI control system and manipulator arms, allowing for rapid weapon swapping and supply handling. Its form-switching mechanism also enabled it to engage effectively in CQC on the ground. These features earned it classification as a 2.5-generation HEXA GEAR. However, its production cost ballooned to the equivalent of several BULKARMa units, making it one of the most expensive machines of its generation. Operationally, its fragile airframe required constant maintenance, and its high ammunition consumption demanded a steady supply chain-necessitating support from advanced ground crews, far beyond what typical Governors could handle. Its high performance also came with an extreme energy demand. Even just powering the main rotor required a massive amount of HEXA G-R.A.M-several times more than most other second-generation units. This was the price paid for its ability to transport heavy cargo, including other HEXA GEAR, but was especially burdensome in the later type, which had additional weight from its form-switching mechanism. As a result, some units opted for the earlier type instead, prioritizing efficiency and sustainability over versatility.

Despite its drawbacks, the deployment of STEELRAIN units consistently delivered decisive results on the battlefield and their performance has been judged more than worth the high cost. However, the enormous strain they placed on resources were unbearable in the end-even for the mighty MSG military-industrial complex, which led to it becoming the butt of a joke: ""STEELRAIN might tear through enemy lines like a storm, but once it's back at base, it's the one left out in the rain."" Nevertheless, the STEELRAIN is still remembered as a HEXA GEAR that struck fear into the hearts of most enemies at the time, especially for those who faced the STEELRAIN units back then.

The "rain of steel" appeared in the skies and silenced every single object crawling on the ground with a rainstorm of bullets.

""Unidentified forces detected within MSG-controlled territory. Commencing elimination protocol.""

Weapons:

- 20mm Gatling Cannon
- Anti-Aircraft Missile
- Rocket Bullet Pod
- Anti-Personnel Machine Gun
- Iron Fist

Model Specifications:

- This attack helicopter can be converted from "Vehicle Mode" into "Humanoid Mode".
- The closed cockpit can be opened and closed, allowing a separately sold Governor unit to be placed inside.
- The seat-unit inside the cockpit has a "reclining" and "sliding" feature to adjust to the size of the models being placed inside.
- This highly detailed cockpit has two types of adjustable levers and adjustable foot pedals installed so that users can fully enjoy arranging the outstanding Governors embarking/disembarking the helicopter.
- The rotating propellers can be freely rotated and the blades folded.
- The "armored windbreaker" includes the two types: the internal head unit "back model" and the transparent canopy "front model" for users to select from.
- The included "20mm Gatling Gun" can be taken apart and used separately similar to the Heavy Weapon Units. Also, it is compatible with the M.S.G Belt Links to enhance the overall firepower.
- The included "air-to-surface missiles" can each be taken separately from the pylon. Also, the pylon can be expanded and missiles aligned.
- By using the included attachments on the main unit and the HEXA-G.R.A.M. system, the included "rocket launcher" can be freely disassembled and expanded. It can also be used by pairing with the attachments that are used to raise the level of freedom for this model kit.
- Compatible with the separately sold Flying Base Neo to create a dramatic display.

Included items:

- 1 x STEELRAIN Model
- 2 x 20mm Gatling Gun
- 2 x Air-to-Surface Missiles
- 2 x Rocket Launcher
- 2 x Rocket Launcher Expansion Parts Set
- 1 x Archive Card

(This item is a reproduction.)"

"The latest Frame Arms Girl is HRESVELGR QIPAO Ver.!

HRESVELGR QIPAO Ver. is a re-imagining of Tomotake Kinoshita's original mecha design HRESVELGR transformed into an original female character illustrated by E-ji Komatsu.

Model Specifications:

- This model features HRESVELGR's signature blue and purple coloring.
- Includes three newly sculpted pre-painted face parts (Smiling, Dizzy, Winking).
- The kit includes a set of blade tonfa. The tips can also be swapped out to change them into a chainsaw tonfa.
- Includes an extendable giant sword.
- Comes with three types of Chinese double bun hairstyles.
- The Chinese double bun hairstyles are also compatible with Frame Arms Girl Hresvelgr=Rufus.
- Both the front and back of the hair have been newly sculpted.
- Includes three types of bangs used with Hresvelgr Bikini Armor Ver.: standard bangs and left and right bangs covering one eye.
- The thighs are newly sculpted to create a curvier silhouette than previous Hresvelgr models.
- The hip joints are a new pop-out type used in Frame Arms Girl Izumo.
- The knee joints are double-jointed and pop-out, providing range of motion while maintaining proportions.
- Includes thicker thighs that can be used with Hresvelgr's mecha legs.
- Hip joint parts compatible with 3mm joints are also included.
- The extendable shoulder joint and bicep joints offer a wide range of motion.
- The hand parts are attached with a ball joint, allowing for a wide range of expressive poses.
- The model kit includes five sets of PVC hand parts. The hands, including joints, are compatible with models of the existing Frame Arms Girl series.
- Includes decals for the eyes and other markings.
- The 3mm connection points on the arms and legs are compatible with existing gear from the M.S.G and Frame Arms series.

What is Frame Arms Girl?
Frame Arms Girl is a spin-off of Kotobukiya's original model kit series, Frame Arms, that creates a bishoujo-style character for each mecha.
The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required.
Equipped with the signature 3mm joints and PVC hands from Frame Arms, Frame Arms Girl models can be combined with a variety of parts from series such as M.S.G (Modeling Support Goods), Frame Arms, and more!
The latest models' heads, arms, and legs in the series are fully compatible with each other, so users can create their very own unique Frame Arms Girl!"

"STYLET Swimsuit Ver. returns in Blue Impulse Colors!

This kit is a variation of STYLET Swimsuit Ver. from Kotobukiya's original series, Frame Arms Girl, featuring Blue Impulse colors.
This model is brought to life based on Humikane Shimada's bishoujo-style character illustration of Takayuki Yanase's Frame Arms design!

Model Specifications:

- The kit includes three new pre-printed face parts: smiling, sparkling eyes, and wincing.
- The color scheme is a wholesome white and light blue.
- The swimsuit has an aerodynamic high cut design and features equipment such as multiple sets of wings around the body and headgear.
- The kit includes a liquid cartridge smart gun.
- Includes a submachine gun.
- The elbows are double-jointed, allowing for a better range of motion.
- The armored legs and other parts of the original Stylet (sold separately) are compatible for easy customization.
- The new bangs can be used with or without the headgear.
- A range of items that were included with Innocentia, such as cat ears, mecha cat ears, mecha fox ears, mecha pointed dog ears, mecha floppy dog ears, and mecha accessories, are included in addition to white mecha cat ears.
- The kit includes five PVC hands with ball joints for each arm.
- The back booster can be reconfigured into fighter jet mode.
- Includes decals for the eyes and other markings.
- The PVC hands are compatible with existing weapons from other series, including M.S.G and Frame Arms.
- The fins of the thighs use 3mm connection joints, allowing for other parts from existing M.S.G series, including Frame Arms, to also be attached.
- Dedicated 3mm joint parts can be attached to the smart gun and submachine gun.

What is Frame Arms Girl?
Frame Arms Girl is a spin-off of Kotobukiya's original model kit series, Frame Arms, that creates a bishoujo-style character for each mecha.
The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required.
Equipped with the signature 3mm joints and PVC hands from Frame Arms, Frame Arms Girl models can be combined with a variety of parts from series such as M.S.G (Modeling Support Goods), Frame Arms, and more!
The latest models' heads, arms, and legs in the series are fully compatible with each other, so users can create their very own unique Frame Arms Girl!"

"Introducing the latest addition to the brand-new GRANDE SCALE series, BASELARD!

Baselard is now available at 1/6 scale (approx. 25 cm)!
This version too was designed by Humikane Shimada and Takayuki Yanase.

The original, detailed Kotobukiya CAD data has been enlarged to a new GRANDE SCALE.
From the ease of assembly and painting to the range of play and poseability, this kit incorporates all the great features of a larger model.

Model Specifications:

- The kit includes three pre-printed face parts (Smiling/Looking Forward, Smiling with Eyes Closed, and Crying/Looking Right).
- The three face parts are pre-painted, allowing users to build a model that closely resembles the original character art.
- By attaching the tail and other parts, users can recreate a Bunny Girl look.
- The hand parts are attached with a ball joint, allowing for a wide range of expressive poses.
- The model kit includes six sets of PVC hand parts.
- The kit comes with larger 1/6 scale (standard doll size) PVC weapon-holding hands for holding guns, swords, etc.
- Includes decals for the eyes and other parts.
- Comes with joint converters to change 5mm points to 3mm. Compatible with gear from the M.S.G and other Kotobukiya model kit series.

What is GRANDE SCALE?
GRANDE SCALE is an all-new model kit series that scales up the original Kotobukiya CAD data of models to a larger, even more impressive size.
The kit combines all the great features of a larger model, from ease of assembly and painting to range of play and poseability.

What is Frame Arms Girl?
Frame Arms Girl is a spin-off of Kotobukiya's original model kit series, Frame Arms, that creates a bishoujo-style character for each mecha.
The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required.
Equipped with the signature 3mm joints and PVC hands from Frame Arms, Frame Arms Girl models can be combined with a variety of parts from series such as M.S.G (Modeling Support Goods), Frame Arms, and more!
The latest models' heads, arms, and legs in the series are fully compatible with each other, so users can create their very own unique Frame Arms Girl!"

"Introducing the latest addition to the brand-new GRANDE SCALE series, MAGATSUKI!

Magatsuki is now available at 1/6 scale (approx. 25cm)!
This version too was designed by ToMo and E-ji Komatsu.

The original, detailed Kotobukiya CAD data has been enlarged to a new GRANDE SCALE.
From the ease of assembly and painting to the range of play and poseability, this kit incorporates all the great features of a larger model.

Model Specifications:

- Thanks to the increased size, the color scheme has been more accurately recreated.
- Includes three types of faces printed with tampography (Default, Injured, and Sad).
- This model's distinctive, transparent armor has been recreated with clear parts and has engravings carved underneath them.
- The 5mm joints enable this model to be assembled into the default form as well as a special "Kunoichi Mode".
- Includes two sets of special weapons, Tenkai (long swords) and Satsuga (short swords).
- The weapons can be sheathed and unsheathed without changing out parts.
- Joint parts are included to attach the long sword Tenkai to the model's heel.
- Headgear can be assembled into a large version or two small versions.
- Optional joint parts for the thighs are also included.
- Hip joint parts are also included.
- A wide range of movement is possible through the pop-out chest and shoulder joints.
- The sliding joint on the hip and the pop-out joints on the thighs also allow a wide range of movement.
- The hand parts are attached with a ball joint, allowing for a wide range of expressive poses.
- The model kit includes five sets of PVC hand parts. The hands, including joints, are compatible with existing Frame Arms Girl GRANDE SCALE series models.
- Includes decals for the eyes and other parts.
- Comes with joint converters to change 5mm points to 3mm. Compatible with gear from the M.S.G and other Kotobukiya model kit series.

What is GRANDE SCALE?
GRANDE SCALE is an all-new model kit series that scales up the original Kotobukiya CAD data of models to a larger, even more impressive size.
The kit combines all the great features of a larger model, from ease of assembly and painting to range of play and poseability.

What is Frame Arms Girl?
Frame Arms Girl is a spin-off of Kotobukiya's original model kit series, Frame Arms, that creates a bishoujo-style character for each mecha.
The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required.
Equipped with the signature 3mm joints and PVC hands from Frame Arms, Frame Arms Girl models can be combined with a variety of parts from series such as M.S.G (Modeling Support Goods), Frame Arms, and more!
The latest models' heads, arms, and legs in the series are fully compatible with each other, so users can create their very own unique Frame Arms Girl!"

"IZUMO Destroyer Ver. joins Kotobukiya's original Frame Arms Girl series!

This model is brought to life based on Humikane Shimada's bishoujo-style character illustration of Takayuki Yanase's Frame Arms CVX-83 Izumo design.

Model Specifications:

- The high leg design is further emphasized compared to the standard Izumo.
- The articulation structure is newly sculpted to recreate the high leg design. The contours of the model are kept intact while expanding the waist's range of movement.
- Three newly sculpted, pre-painted face parts with narrower eyes are included (Determined, Daring Smile, Cat-like Smile).
- Features an all-new color scheme.
- Includes two throwing anchors and chains.
- This model is a Frame Arms Girl that carries several combat drones.
- The large-scale weapons and armor can be transformed into a cruising form or rearranged to create various other forms.
- Standard arms and legs are included to recreate the model in unarmed mode.
- The head part can be exchanged between armed and unarmed mode.
- Three newly sculpted, pre-painted face parts are included.
- The armor on the hips is articulated, giving the thighs a greater range of motion.
- Both left and right grips are included for the rifle and shield, allowing them to be held in either hand.
- The missiles on the back armor can be set in firing mode by opening the hatches.
- The dagger mounted on the back armor can be displayed as a weapon.
- The kit includes decals for the eyes and other markings.
- The kit includes five sets of PVC hand parts.
- The PVC hands are compatible with existing weapons from the M.S.G and Frame Arms series.
- The 3mm connection points on the arms and legs are compatible with existing weapons and armor from the M.S.G and Frame Arms series.

What is Frame Arms Girl?
Frame Arms Girl is a spin-off of Kotobukiya's original model kit series, Frame Arms, that creates a bishoujo-style character for each mecha.
The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required.
Equipped with the signature 3mm joints and PVC hands from Frame Arms, Frame Arms Girl models can be combined with a variety of parts from series such as M.S.G (Modeling Support Goods), Frame Arms, and more!
The latest models' heads, arms, and legs in the series are fully compatible with each other, so users can create their very own unique Frame Arms Girl!"

Vanguard Leader is a Valiant variation kit based on the concept of a commanding officer or an instructor. This kit comes with two types of face parts, a mecha-style normal mask and naked face parts. Users can mix and match to create their preferred style.

Naked Face Parts:
This kit has movable eyes and a painted face. The eyes can be adjusted to look different ways using the included tool. Since the head is attached in the same way as other normal mask types, this model is compatible with Sousai Shojo Teien models.

Normal Mask:
Like previous Anothers, a mask with a mecha design is also included. The eyes are movable and the line of sight can be adjusted. It can also be attached to characters from the Sousai Shojo Teien series.
*The naked face parts and normal mask are not compatible with Ao Gennai or Bukiko Kotobuki.

EXARMOR WHITE COMMANDER:
Like Ruby Eye, this model also has a cosplay-style exarmor outfit.
The head sculpt is an inverse design of Valiant's.
Her hat is removable and has 3mm connection points. The clear blue visor attached to the head gear is removable. The receiver unit extending from the side of her head has two modes: active mode and passive mode.

With six pieces of armor on the front, back, left, and right that can be adjusted individually, the miniskirt armor allows for aggressive action poses.
The sleeve armor can be taken off and swapped out with shackles.

Two Types of Whips:
Inspired by the concept of a strict instructor, the weapons included in this kit are a short whip and a long whip.
The long whip is made from a lead wire attached to a grip, which makes it possible to coil and attach it to mounting parts.

Articulation Features:
The best feature of this series is the approximately 50 points of articulation throughout the body. The six pieces of the miniskirt armor can be moved individually, allowing the model to be posed in a wide variety of actions, from quiet poses like kneeling or sitting cross-legged to high kicks and poses with weapons.

Included Items:
Vanguard Leader Model x1
Naked Face x1
Eye Adjustment Tool x1
Normal Mask x1
Short Whip x1
Long Whip x1
Long Whip Attachment Parts x1
Shackles x2
Standard Wrist Joint and Spacer x1 (Left and Right)
Single-Piece Rear Armor x1
Expansion Skin Parts Skin Color A x1 Set

"The series' first male-body style character with a bare face joins the lineup!
Zirconia is a character designed based on the image of a male-body type Seeker.
Despite its simple armaments, it's a design that allows the marionnette style's action gimmicks to be fully enjoyed.

Life-like Head Part:
The newly sculpted parts are newly designed by Kodama, with the head part in particular being carefully crafted down to the hair as in the Sousai Shojo Teien series.
The pre-painted face part, Naked Face, comes with movable eyes, and the included tool can be used to change the line of sight in accordance with various action poses.
*The face part uses a unique design, and is not compatible with Mephisto or Ghillie Dhu.

Articulation Features:
Zirconia has approximately 54 points of articulation throughout the body.
The knee joint, with a new shin articulation, is comprised of a single layer of joints and can be bent inward enough to allow the model to sit in seiza, with its legs folded underneath.
New toe articulation also allows for more aggressive poses.
The knee armor can move independently and can be adjusted to the desired position.
The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose.

Large Arm Blade:
The base of the Arm Blade can be rotated, allowing the blade to be pointed forwards. The connection joints are 3mm in diameter, allowing the blade to be attached to other characters.

Three-point Wrist Joints:
The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward.
Zirconia features larger joints than female-body style characters, such as Principal, allowing Zirconia to hold larger, more powerful weapons.
The normal wrist joints and spacer can be used freely to one's preference.

Hands:
The kit includes seven types of hands. These include hands designed for holding swords and hands for holding guns as well as clenched fists and multiple open hands.

Color Scheme:
The model uses eight colors: off-white, white, light gray, gray, stone gray, black, and clear black.

Included Items:

- 1 x Zirconia Model
- 1 x Arm Blade
- 1 x Seven Types of Hand Parts
- 1 x Hip Armor with 3mm Connection Joint compatible with Flying Base
- 1 x Standard Wrist Joint and Spacer (Left and Right)
- 1 x Single-Piece Rear Armor

Introducing an all-new mage-inspired Metamorphose unit!
This kit is a stand-alone color variant of the Exarmor that is included with Necro Face.

Exarmor Sorceress:
This armor features hooded headgear and a removable skull mask.
The base mask behind the skull mask has three eyes, with the third eye sculpted into the forehead. The eyes are movable, and the included tool can be used to adjust the line of sight. The mask can be swapped out for face parts of other female-type Megalomaria and Sousai Shojo Teien characters.
The unarmored visor can also be replaced with bangs parts from Sousai Shojo Teien characters. Even with the hood equipped, some characters' bangs parts can be attached. The bangs parts from Madoka Yuki, Emma Koishikawa, Koyomi Takanashi, Eimi Nijimura, and Short Wig can be equipped.
*Not compatible with Ao Gennai and Bukiko Kotobuki's face and bangs parts.

The four extended artificial limbs on the back are movable, and can be extended and retracted.
The base is a 4mm ball joint, making it possible to attach female Megalomaria arms to create a six-armed character.
The skirt-like pieces of armor are connected with ball joints and have multiple points of articulation, allowing for a wide range of dynamic poses.
The extended artificial arms can also be removed and used as a mage's familiar.

Expansion Skin Parts:
The expansion skin parts, which received a large response after they were first announced, have also been included to increase compatibility with female-body type plastic model kit series, such as Sousai Shojo Teien.
The parts use the pale Skin Color C, which matches well with Sousai Shojo Teien's Kuon Yakushiji [Maria Kagaribi Costume].

Coloring:
The unit features parts in five colors.
Red (Fuma model color), gold, light grey (Principal model color), clear orange (Ninja Fox color) and pale flesh (Skin Color C).

Included Items:
Exarmor Sorceress x1 Set
Expansion Skin Parts Skin Color C ×1 Set

"Introducing Trickle Dekapodia from the XenoAlma Series - A weapon series that expands the lore and customizability of the Arcanadea series.
The parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Velretta.
Trickle Dekapodia can also be combined with Hydro Zeeforce to create the giant XenoAlma, Tidal Orketos.
Each part is connected via 3mm joints, allowing them to be used not only with Arcanadea characters but with all original Kotobukiya series models.

Included Items & Features:

- Parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Velretta.
- Trickle Dekapodia can be combined with Hydro Zeeforce to create the giant XenoAlma, Tidal Orketos.
- Trickle Dekapodia can be combined with Hydro Zeeforce to create a large gun, Tidal Harpoon.
- The 3mm connection points on each part make them customizable and compatible with existing M.S.G, Frame Arms and Frame Arms Girl parts.
- Includes the standard Arcanadea base. Using the base, Trickle Dekapodia can be displayed floating in the air.

Weaponry Mode:

- Crown: 3mm connection allows for connection with other Kotobukiya kits.
- Shoulder Armor: 3mm joint connection allows connection with other Kotobukiya kits.
- Back Unit: Features a 3mm joint in the base and ball joints that allow for flexible movement.
- Leg Armor: The ankle and knee armors can move with the model, allowing for flexible posing.
- Lance: The extendable grip allows for use in various poses. The three types of armor feature 3mm joint connections that allow for connection with other Kotobukiya kits."

"Introducing Blaze Ophis from the XenoAlma Series - A weapon series that expands the lore and customizability of the Arcanadea series.
The parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Lumitea.
Blaze Ophis can also be combined with Flame Straile to create the giant XenoAlma, Explode Volcarion.
Each part is connected via 3mm joints, allowing them to be used not only with Arcanadea characters but with all original Kotobukiya series models.

Included Items & Features:

- Parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Lumitea.
- Blaze Ophis can be combined with Flame Straile to create the large XenoAlma, Explode Volcarion.
- Blaze Ophis can be combined with Flame Straile to create a large back unit, Explode Wing.
- Each part is articulated, allowing for a variety of poses in Monster form.
- The 3mm connection points on each part make them customizable and compatible with existing M.S.G, Frame Arms, Frame Arms Girl, HEXA GEAR, SOUSAISHOJOTEIEN, and MEGALOMARIA parts.
- The kit includes the standard Arcanadea base. Use the base to display Blaze Ophis floating in the air.

Weaponry Mode:

- Ear Guards: Left and right included. Can be connected to the head parts of Lumitea and Ermeda. Parts to convert them to 3mm joint are also included.
- Back Unit: All parts are connected by 3mm joints, allowing for flexible movement.
- Longbow: A longbow can be created by adding some parts to the back unit.
- Bow Gun: 3mm joint connection allows connection with other Kotobukiya kits. The front and back cover parts also have 3mm connections, and can be detached or expanded.
- Blade: 3mm joint connection allows connection with other Kotobukiya kits. The front and back cover parts also have 3mm connections, and can be detached or expanded.
- Leg Armor: 3mm joint connections of the knee guards allow connection with other Kotobukiya kits. Can be connected to Frame Arms Girl and Megami Device using the included attachments.

*Some products may not be compatible due to shape restrictions."

"Introducing Flame Straile from the XenoAlma Series - A weapon series that expands the lore and customizability of the Arcanadea series.
The parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Lumitea.
Flame Straile can also be combined with Blaze Ophis to create the giant XenoAlma, Explode Volcarion.
Each part is connected via 3mm joints, allowing them to be used not only with Arcanadea characters but with all original Kotobukiya series models.

Included Items & Features:

- Parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Lumitea.
- Flame Straile can be combined with Blaze Ophis to create the large XenoAlma, Explode Volcarion.
- Flame Straile can be combined with Blaze Ophis to create a large back unit, Explode Wing.
- Each part is articulated, allowing for a variety of poses in Monster form.
- The 3mm connection points on each part make them customizable and compatible with existing M.S.G, Frame Arms, Frame Arms Girl, HEXA GEAR, SOUSAISHOJOTEIEN, and MEGALOMARIA parts.
- The kit includes the standard Arcanadea base. Use the base to display Flame Straile floating in the air.

Weaponry Mode:

- Shoulder Armor: Includes armor for both shoulders. 3mm joint connection allows connection with other Kotobukiya kits. The front and back cover parts also have 3mm connections, and can be detached or expanded.
- Back Unit: The base, left, and right units are connected by 3mm joints, allowing for flexible movement. The flame effect parts also have 3mm connections, and can be detached or expanded. The effect part in the center of the back unit is articulated and feature a ball joint that allows for flexible movement.
- Swords: Two curved swords can be created by adding parts to a part of the back unit.

*Some products may not be compatible due to shape restrictions."

Magnificent model to assemble, true to the film. A perfect gift for all fans.

Accessories not included.
Instructions in Japanese.

Size: 35 x 19 x 5 cm

Simple and fuss-free assembly! Introducing an articulated bishojo plastic model body, Muse Body: Ichika for the PLAMATEA lineup!

- The model stands at approx. 145mm in height. The joints of the model are fully articulated. The main body features approximately 70 parts.
- A pre-painted smiling face plate and a set of two face plates (smiling x 1, neutral face x 1) that can be customized with eye decals are included.
- The model comes with four types of hand parts: closed hands, open hands, peace sign hands and gripping hands. The holes for the gripping hands measure 3mm in diameter, allowing the model to hold items that are compatible with the hole size.
- In addition to a neck part that features a 5mm diameter ball joint, one 4mm and one 6mm joint part are also included for customization.
- Three types of chest parts (small, medium and large) are included.
- The ring parts on the chest, waist and arms/legs are available in two colors.
- A Type and B Type, which feature different hair colors, are also up for preorder!

The Bandai Star Wars model kit TIE Interceptor in 1:72 is a must for every true Star Wars fan. The TIE Interceptor was a very fast and agile light interceptor of the TIE series used by the Galactic Empire. With its advanced armament and agile handling, the TIE Interceptor was a fearsome opponent in close combat. This detailed model kit features clear parts, laser beams and a pilot figure, making it the perfect addition to any collection. With its realistic design, the 1/72nd scale TIE Interceptor will impress everyone who sees it. Whether you are an amateur modeler or an experienced modeler, this kit is sure to provide you with hours of fun.

Scale: 1:72
Age: 13 +
Number of parts: 53
Length: 102 mm

Contents:

- Detailed parts
- Laser beams in the form of green clear parts
- Pilot figure
- Plastic model kit (not assembled)
- Illustrated multilingual building instructions
- Decals and stickers

Scale: 1:144
Age: 13 +
Number of parts: 196
Length: 241 mm

- Movable loading ramp
- 2 cockpit canopy versions
- Display stand
- Landing gear
- 4 figures including BB-8

Contents:

- Plastic model kit (not assembled)
- Illustrated multilingual building instructions
- Decals and stickers

Officially licensed 1/48 scale plastic model kit.

Features:

- 1/48 scale snap fit kit
- Parts: 144
- Size: 18,2 cm
- No gluing required

Paint not included.

Officially licensed 1/72 scale plastic model kit.

Features:

- 1/72 scale snap fit kit
- Parts: 44
- Length: 10 cm
- No gluing required
- With display stand

Paint not included.

Officially licensed 1/72 scale plastic model kit.

Features:

- 1/72 scale snap fit kit
- Parts: 144
- Length: 17,3 cm
- No gluing required
- With display stand

Paint not included.

- Snap Model Kit
- Gluing & Painting required
- Scale: 1/112
- Parts: 21
- Length: 110 mm
- With illustrated assembly instructions

- Snap Model Kit
- Gluing & Painting required
- Scale: 1/57
- Parts: 38
- Length: 218 mm
- Width: 199 mm
- With illustrated assembly instructions

- Snap Model Kit
- Gluing & Painting required (incl.)
- Scale: 1/112
- Parts: 21
- Length: 100 mm
- With illustrated assembly instructions

- Snap Model Kit
- Gluing & Painting required (incl.)
- Scale: 1/241
- Parts: 20
- Length: 100 mm
- With illustrated assembly instructions